-
Our own design performance camshaft for 8v 1.9 TDI VE engines, Please specify engine type in order.
-
Dyno tested to work up to 390hp with boost only and 490hp with NOS.
-
New Chilled Iron OEM quality cam.
-
Every camshaft is inspected to meet or exceed OEM specs surface harness ~45HRC to ensure durability and long service life.
-
Intake duration +15-degrees and Exhaust duration +22-degrees to stock.
-
Lift increase to stock +1.5mm
-
Will increase powerband from stock ~3600rpm to ~4300rpm and pulls really hard above 2000rpm.
-
Spools larger turbos better than stock camshaft and reduces EGTs.
-
Recommended to use Higher tension valve springs to get benefts of RPM range increase.
-
May give a slight gray haze in cold starts at cold climates untill warmed, but still starts good.
NOTE: Do not use with used hydraulic followers, during cam break in surfaces are mated and mixing new cam with old parts will ruin cam very fast.
NOTE2: Does NOT fit with stock pistons without machining spring pockets!!